Performance Analysis of Network-Assisted Two-Hop D2D Communications

Network-assisted single-hop device-to-device (D2D) communication can increase the spectral and energy efficiency of cellular networks by taking advantage of the proximity, reuse, and hop gains when radio resources are properly managed between the cellular and D2D layers. In this paper we argue that D2D technology can be used to further increase the spectral and energy efficiency if the key D2D radio resource management algorithms are suitably extended to support network assisted multi-hop D2D communications. Specifically, we propose a novel, distributed utility maximizing D2D power control (PC) scheme that is able to balance spectral and energy efficiency while taking into account mode selection and resource allocation constraints that are important in the integrated cellular-D2D environment. Our analysis and numerical results indicate that multi-hop D2D communications combined with the proposed PC scheme can be useful not only for harvesting the potential gains previously identified in the literature, but also for extending the coverage of cellular networks.Comment: 6 pages and 7 figure

On the Spectral Efficiency and Fairness in Full-Duplex Cellular Networks

To increase the spectral efficiency of wireless networks without requiring full-duplex capability of user devices, a potential solution is the recently proposed three-node full-duplex mode. To realize this potential, networks employing three-node full-duplex transmissions must deal with self-interference and user-to-user interference, which can be managed by frequency channel and power allocation techniques. Whereas previous works investigated either spectral efficient or fair mechanisms, a scheme that balances these two metrics among users is investigated in this paper. This balancing scheme is based on a new solution method of the multi-objective optimization problem to maximize the weighted sum of the per-user spectral efficiency and the minimum spectral efficiency among users. The mixed integer non-linear nature of this problem is dealt by Lagrangian duality. Based on the proposed solution approach, a low-complexity centralized algorithm is developed, which relies on large scale fading measurements that can be advantageously implemented at the base station. Numerical results indicate that the proposed algorithm increases the spectral efficiency and fairness among users without the need of weighting the spectral efficiency. An important conclusion is that managing user-to-user interference by resource assignment and power control is crucial for ensuring spectral efficient and fair operation of full-duplex networks.Comment: 6 pages, 4 figures, accepted in IEEE ICC 2017. arXiv admin note: text overlap with arXiv:1603.0067

Distributed Spectral Efficiency Maximization in Full-Duplex Cellular Networks

Three-node full-duplex is a promising new transmission mode between a full-duplex capable wireless node and two other wireless nodes that use half-duplex transmission and reception respectively. Although three-node full-duplex transmissions can increase the spectral efficiency without requiring full-duplex capability of user devices, inter-node interference - in addition to the inherent self-interference - can severely degrade the performance. Therefore, as methods that provide effective self-interference mitigation evolve, the management of inter-node interference is becoming increasingly important. This paper considers a cellular system in which a full-duplex capable base station serves a set of half-duplex capable users. As the spectral efficiencies achieved by the uplink and downlink transmissions are inherently intertwined, the objective is to device channel assignment and power control algorithms that maximize the weighted sum of the uplink-downlink transmissions. To this end a distributed auction based channel assignment algorithm is proposed, in which the scheduled uplink users and the base station jointly determine the set of downlink users for full-duplex transmission. Realistic system simulations indicate that the spectral efficiency can be up to 89% better than using the traditional half-duplex mode. Furthermore, when the self-interference cancelling level is high, the impact of the user-to-user interference is severe unless properly managed.Comment: 7 pages, 3 figures, accepted in IEEE ICC 2016 - Workshop on Novel Medium Access and Resource Allocation for 5G Network

Optimization and Fundamental Insights in Full-Duplex Cellular Networks

The next generations of cellular networks are expected to provide explosive data rate transmissions and very low latencies. To meet such demands, one of the promising wireless transmissions candidates is in-band full-duplex communications, which enable wireless devices to simultaneously transmit and receive on the same frequency channel. Full-duplex communications have the potential to double the spectral efficiency and reduce the transmission delays when compared to current half-duplex systems that either transmit or receive on the same frequency channel. Until recently, full-duplex communications have been hindered by the interference that leaks from the transmitter to its own receiver,the so-called self-interference. However, advances in digital and analog self-interference suppression techniques are making it possible to reduce the self-interference to manageable levels, and thereby make full-duplex a realistic candidate for advanced wireless systems. Although in-band full-duplex promises to double the data rates of existing wireless technologies, its deployment in cellular networks must be gradual due to the large number of legacy devices operating in half-duplex mode. When half-duplex devices are deployed in full-duplex cellular networks, the user-to-user interference may become the performance bottleneck. In such new interference situation, the techniques such as user pairing, frequency channel assignment, power control, beamforming, and antenna splitting become even more important than before, because they are essential to mitigate both the user-to-user interference and the residual self-interference. Moreover, introduction of full- duplex in cellular networks must comply with current multi-antenna systems and, possibly, transmissions in the millimeter-wave bands. In these new scenarios, no comprehensive analysis is available to understand the trade-offs in the performance of full-duplex cellular networks. This thesis investigates the optimization and fundamental insights in the design of spectral efficient and fair mechanisms in full-duplex cellular networks. The novel analysis proposed in this thesis suggests new solutions for maximizing full-duplex performance in the sub-6 GHz and millimeter-wave bands. The investigations are based on an optimization theory approach that includes distributed and nonconvex optimization with mixed integer-continuous variables, and novel extensions of Fast-Lipschitz optimization. The analysis sheds lights on fundamental questions such as which antenna architecture should be used and whether full-duplex in the millimeter-wave band is feasible. The results establish fundamental insights in the role of user pairing, frequency assignment, power control and beamforming; reveal the special behaviour between the self-interference and user- to-user interference; analyse the trade-offs between antenna sharing and splitting for uplink/downlink signal separation; and investigate the role of practical beamforming design in full-duplex millimeter-wave systems. This thesis may provide input to future standardization process of full-duplex communications.QC 20190322</p

Optimization and Fundamental Insights in Full-Duplex Cellular Networks

The next generations of cellular networks are expected to provide explosive data rate transmissions and very low latencies. To meet such demands, one of the promising wireless transmissions candidates is in-band full-duplex communications, which enable wireless devices to simultaneously transmit and receive on the same frequency channel. Full-duplex communications have the potential to double the spectral efficiency and reduce the transmission delays when compared to current half-duplex systems that either transmit or receive on the same frequency channel. Until recently, full-duplex communications have been hindered by the interference that leaks from the transmitter to its own receiver,the so-called self-interference. However, advances in digital and analog self-interference suppression techniques are making it possible to reduce the self-interference to manageable levels, and thereby make full-duplex a realistic candidate for advanced wireless systems. Although in-band full-duplex promises to double the data rates of existing wireless technologies, its deployment in cellular networks must be gradual due to the large number of legacy devices operating in half-duplex mode. When half-duplex devices are deployed in full-duplex cellular networks, the user-to-user interference may become the performance bottleneck. In such new interference situation, the techniques such as user pairing, frequency channel assignment, power control, beamforming, and antenna splitting become even more important than before, because they are essential to mitigate both the user-to-user interference and the residual self-interference. Moreover, introduction of full- duplex in cellular networks must comply with current multi-antenna systems and, possibly, transmissions in the millimeter-wave bands. In these new scenarios, no comprehensive analysis is available to understand the trade-offs in the performance of full-duplex cellular networks. This thesis investigates the optimization and fundamental insights in the design of spectral efficient and fair mechanisms in full-duplex cellular networks. The novel analysis proposed in this thesis suggests new solutions for maximizing full-duplex performance in the sub-6 GHz and millimeter-wave bands. The investigations are based on an optimization theory approach that includes distributed and nonconvex optimization with mixed integer-continuous variables, and novel extensions of Fast-Lipschitz optimization. The analysis sheds lights on fundamental questions such as which antenna architecture should be used and whether full-duplex in the millimeter-wave band is feasible. The results establish fundamental insights in the role of user pairing, frequency assignment, power control and beamforming; reveal the special behaviour between the self-interference and user- to-user interference; analyse the trade-offs between antenna sharing and splitting for uplink/downlink signal separation; and investigate the role of practical beamforming design in full-duplex millimeter-wave systems. This thesis may provide input to future standardization process of full-duplex communications.QC 20190322</p

Spectral Efficiency and Fairness Maximization in Full-Duplex Cellular Networks

Future cellular networks, the so-called 5G, are expected to provide explosive data volumes and data rates. To meet such a demand, the research communities are investigating new wireless transmission technologies. One of the most promising candidates is in-band full-duplex communications. These communications are characterized by that a wireless device can simultaneously transmit and receive on the same frequency channel. In-band full-duplex communications have the potential to double the spectral efficiencywhen compared to current half duplex systems. The traditional drawback of full-duplex was the interference that leaks from the own transmitter to its own receiver, the so- called self-interference, which renders the receiving signal unsuitable for communication.However, recent advances in self-interference suppression techniques have provided high cancellation and reduced the self-interference to noise floor levels, which shows full-duplex is becoming a realistic technology component of advanced wireless systems. Although in-band full-duplex promises to double the data rate of existing wireless technologies, its deployment in cellular networks is challenging due to the large number of legacy devices working in half-duplex. A viable introduction in cellular networks is offered by three-node full-duplex deployments, in which only the base stations are full-duplex, whereas the user- or end-devices remain half-duplex. However, in addition to the inherent self-interference, now the interference between users, the user-to-user interference, may become the performance bottleneck, especially as the capability to suppress self-interference improves. Due to this new interference situation, user pairing and frequency channel assignment become of paramount importance, because both mechanisms can help to mitigate the user-to-user interference. It is essential to understand the trade-offs in the performance of full-duplex cellular networks, specially three-node full-duplex, in the design of spectral and energy efficient as well as fair mechanisms. This thesis investigates the design of spectral efficient and fair mechanisms to improve the performance of full-duplex in cellular networks. The novel analysis proposed in this thesis suggests centralized and distributed user pairing, frequency channel assignment and power allocation solutions to maximize the spectral efficiency and fairness in future full-duplex cellular networks. The investigations are based on distributed optimization theory with mixed integer-real variables and novel extensions of Fast-Lipschitz optimization. The analysis sheds lights on two fundamental problems of standard cellular networks, namely the spectral efficiency and fairness maximization, but in the new context of full-duplex communications. The results in this thesis provide important understanding in the role of user pairing, frequency assignment and power allocation, and reveal the special behaviourbetween the legacy self-interference and the new user-to-user interference. This thesis can provide input to the standardization process of full-duplex communications, and have the potential to be used in the implementation of future full-duplex in cellular networks.QC 20170403</p

Spectral Efficient and Fair User Pairing for Full-Duplex Communication in Cellular Networks

—A promising new transmission mode in cellular networks is the three-node full-duplex mode, which involves a base station with full-duplex capability and two half-duplex user transmissions on the same frequency channel for uplink and downlink. The three-node full-duplex mode can increase spectral efficiency, especially in the low transmit power regime, without requiring full-duplex capability at user devices. However, when a large set of users is scheduled in this mode, self-interference at the base station and user-to-user interference can substantially hinder the potential gains of full-duplex communications. This paper investigates the problem of grouping users to pairs and assigning frequency channels to each pair in a spectral efficient and fair manner. Specifically, the joint problem of user uplink/downlink frequency channel pairing and power allocation is formulated as a mixed integer nonlinear problem that is solved by a novel joint fairness assignment maximization algorithm. Realistic system level simulations indicate that the spectral efficiency of the users having the lowest spectral efficiency is increased by the proposed algorithm, while a high ratio of connected users in different loads and self-interference levels is maintained.QC 20161019Wireless@KTH BUS

Fast-Lipschitz Power Control and User-Frequency Assignment in Full-Duplex Cellular Networks

In cellular networks, the three-node full-duplex transmission mode has the po-tential to increase spectral efficiency without requiring full-duplex capability ofusers. Consequently, three-node full-duplex in cellular networks must deal with self-interference and user-to-user interference, which can be managed by power controland user-frequency assignment techniques. This paper investigates the problem ofmaximizing the sum spectral efficiency by jointly determining the transmit powersin a distributed fashion, and assigning users to frequency channels. The problem is for-mulated as a mixed-integer nonlinear problem, which is shown to be non-deterministicpolynomial-time hard. We investigate a close-to-optimal solution approach by dividingthe joint problem into a power control problem and an assignment problem. The powercontrol problem is solved by Fast-Lipschitz optimization, while a greedy solution withguaranteed performance is developed for the assignment problem. Numerical resultsindicate that compared with the half-duplex mode, both spectral and energy efficienciesof the system are increased by the proposed algorithm. Moreover, results show that thepower control and assignment solutions have important, but opposite roles in scenarioswith low or high self-interference cancellation. When the self-interference cancellationis high, user-frequency assignment is more important than power control, while powercontrol is essential at low self-interference cancellation.QC 20171106</p